Best Telescope Motor Drives Comparisons and Specifications


Celestron R/A Single Axis Motor Drive

Celestron

7.4
  • Install this motor drive on your AstroMaster or PowerSeeker equatorially mounted telescope and start tracking the stars!
  • Right Ascension tracking compensates for the Earth’s rotation
  • Can be used in the Northern or Southern Hemisphere
  • For Celestron CG-2 and CG-3 equatorial mounts
  • BATTERIES : 1 9V batteries required.
  • SHIPPING WEIGHT : 10.6 ounces
  • ITEM WEIGHT : 1 pounds
  • PRODUCT DIMENSIONS : 17.8 x 9.2 x 29 inches

PIXNOR 10pcs L293D DIP 16-pin IC Stepper Motor Drivers Controllers

PIXNOR

8.4
  • Color: mainly black. Material: durable hard alloy and plastic.
  • L293D DIP 16-pin IC Stepper Motor Drivers Controllers.
  • Channel Capability: 600mA output current channel.
  • Peak Output Current: 1.2A Channel .
  • Enable facility. Over temperature protection. Pin No: 16 pins.
  • SHIPPING WEIGHT : 0.48 ounces
  • ITEM WEIGHT : 0.48 ounces
  • PRODUCT DIMENSIONS : 1.3 x 1 x 0.9 inches

STEPPERONLINE Short Body Nema 17 Bipolar Stepper Motor 1A 18.4oz.in/13Ncm DIY CNC Extruder

STEPPERONLINE

8.0
  • Short Height
  • 13Ncm holding torque
  • NEMA 17 bipolar 1.65"x1.65"x0.79" 4-wire
  • 1.8 deg. step angle
  • Rated current 1.0A & resistance 3.5ohms
  • SHIPPING WEIGHT : 4 ounces
  • ITEM WEIGHT : 4 ounces
  • PRODUCT DIMENSIONS : 1.6 x 1.6 x 0.8 inches

Longruner 5X Geared Stepper Motor 28byj 48 Uln2003 5v Stepper Motor Uln2003 Driver Board

Longruner

8.6
  • 5pcs Stepper motor and driver board compatible with MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi.
  • Stepper motor with a standard interface. A, B, C, D four-phase LED indicates the status of the stepper motor work.
  • Motor diameter: 1.1 inches.Wire length:9.05 inchs. Stepping angle: 5.625 x 1/64.Reduction ratio: 1/6.Drive Module Board Size:1.26 inchsX1.38inchs. Cable length: about 20cm /8-inch.
  • Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board.
  • Good after-sales service.
  • SHIPPING WEIGHT : 10.4 ounces
  • ITEM WEIGHT : 10.4 ounces
  • PACKAGE DIMENSIONS : 6.5 x 4.8 x 1.7 inches

Gazeer 6 Sets Stepper Motor 28Byj-48 5V Dc 4-Phase 5-Wire + Uln2003 Driver Board

Gazeer

7.8
  • A, B, C, D four-phase LED indicates the status of the stepper motor work.
  • Stepper motor with a standard interface, when used directly pluggable.
  • Drive module board size: 2.8cm x 2.8cm x 2cm.
  • 100% Brand New
  • BATTERIES : 1 AA batteries required.
  • SHIPPING WEIGHT : 8 ounces
  • ITEM WEIGHT : 5.6 ounces
  • PACKAGE DIMENSIONS : 5 x 4.1 x 2.4 inches

DC Motor and Stepper FeatherWing Add-on

Adafruit

9.0
  • 4 full H-Bridges: the TB6612 chipset provides 1.2A per bridge with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC.
  • Up to 4 bi-directional DC motors with individual 12-bit speed selection
  • Up to 2 stepper motors with single coil, double coil, interleaved or micro-stepping.
  • Big 3.5mm terminal block connectors to easily hook up wires and power
  • Polarity protected 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
  • SHIPPING WEIGHT : 0.32 ounces
  • ITEM WEIGHT : 0.16 ounces
  • PRODUCT DIMENSIONS : 2 x 0.9 x 0.1 inches

tatoko DC 3V 12000RPM Two Wired 10mm x 3mm Coin Cell Phone Vibration Motor 6PCS

tatoko

  • Battery Included: No; Rated Voltage: DC1.5- 3V
  • Speed: 12000 RPM
  • Body Size: 10 x 3mm/ 0.39" x 0.12"
  • Self adhesive Vibration Micro-motor for cell phone.
  • Package included: 6 x DC Vibration Motors
  • SHIPPING WEIGHT : 0.32 ounces
  • ITEM WEIGHT : 0.32 ounces
  • PACKAGE DIMENSIONS : 4.3 x 2.8 x 0.2 inches

ONLYKXY Small Mini 1.5-5V DC Motor 300

ONLYKXY

10.0
  • Power supply: 1.5-5V
  • Rated Speed:about 9000 RPM under the condition of 3-5V
  • No-load current: 0.02A; Stalled current: 0.25A
  • Diameter: 24.5mm; Height: 12.2mm
  • Diameter of the shaft: 2mm; Shaft Length: 8.0mm
  • SHIPPING WEIGHT : 6.4 ounces
  • ITEM WEIGHT : 3.52 ounces
  • PACKAGE DIMENSIONS : 6.2 x 3 x 0.9 inches
  • BATTERIES REQUIRED : No
  • SIZE : 4 Piece
  • BATTERIES INCLUDED : No

Yasorn 15pcs Mini Vibration Motor Flat Cell Phone Vibrating Motor DC 3V 12000RPM Two Wired 10mm x 3mm

Yasorn

  • Energy Saving --- Yasorn Miniature Vibration Motor very small electric consumption, strong vibration.
  • Applicable Scene --- Self adhesive Vibration Micro-motor for cell phone, tablet computer, electronic toy, watch, bracelet, health care products.
  • Product Parameters --- Battery Included: No; Rated Voltage: DC 3V 0.06A; Speed: 12000±2000 ; Body Size: 10 x 3mm .
  • Package included --- 15 pcs Cell Phone Flat Vibration Motors.
  • Quality Assurance --- Yasorn friendly customer service. We have a commitment to every buyer 100% satisfaction. Please don't hesitate to contact us Yasorn if you are not satisfied with your purchase. We will do our best to solve all problems for you.
  • SHIPPING WEIGHT : 0.64 ounces
  • ITEM WEIGHT : 0.64 ounces
  • PACKAGE DIMENSIONS : 3.5 x 2 x 0 inches

Longruner 5X Geared Stepper Motor 28byj 48 Uln2003 5v Stepper Motor Uln2003 Driver Board Compatible with ArduinoIDE

Longruner

8.6
  • 5pcs Stepper motor and driver board compatible with arduinoIDE MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi.
  • Stepper motor with a standard interface. A, B, C, D four-phase LED indicates the status of the stepper motor work.
  • Motor diameter: 1.1 inches.Wire length:9.05 inchs. Stepping angle: 5.625 x 1/64.Reduction ratio: 1/6.Drive Module Board Size:1.26 inchsX1.38inchs. Cable length: about 20cm /8-inch.
  • Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board+40 Pin Dupont Wire .
  • We offer tutorial for beginner to our customers.
  • SHIPPING WEIGHT : 8.5 ounces
  • ITEM WEIGHT : 8.5 ounces
  • PACKAGE DIMENSIONS : 7.7 x 3.9 x 2 inches